Introduction
That “revving” noise coming from your air conditioner can be quite unsettling. It’s often described as sounding like a car engine speeding up and slowing down. This isn’t normal, and it usually signals that something isn’t working quite right within your AC system. It’s important to address this noise sooner rather than later, as ignoring it could lead to more significant damage and costly repairs. This guide is designed to help you understand why your AC is making this noise and what steps you can take to troubleshoot the issue before calling a professional.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Ac Making Revving Noise.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of AC Making Revving Noise
Here are some of the most common reasons why your AC might be making a revving noise:
- Loose Fan Blade: A fan blade that’s come loose can wobble and create a rhythmic, revving-like sound as it spins.
- Debris in the Fan: Leaves, twigs, or other debris can get caught in the fan blades, causing them to hit against the housing and make a noise.
- Failing Fan Motor: A worn-out fan motor might struggle to maintain a consistent speed, resulting in a revving sound.
- Compressor Issues: The compressor is the heart of your AC. If it’s struggling to start or is experiencing internal problems, it can produce unusual noises.
- Refrigerant Leaks: Low refrigerant can cause the compressor to work harder, leading to erratic operation and associated noises.
- Contactor Problems: The contactor is an electrical switch that controls the compressor. A faulty contactor can cause the compressor to cycle on and off rapidly, creating a revving sound.
- Loose Mounting Bolts: Over time, the bolts that secure the AC unit can loosen, leading to vibrations and noises.
- Crankshaft Imbalance: If the compressor crankshaft is imbalanced, it leads to unusual sounds due to irregular rotation.
Symptoms Checklist
Here are some clues that will help you diagnose the specific issue your AC system is having:
- The noise increases or decreases with the fan speed.
- The AC unit vibrates excessively.
- The AC is not cooling as well as it used to.
- You hear the noise only when the AC is starting up.
- The noise is accompanied by other unusual sounds, such as hissing or bubbling.
- Your electricity bills have increased.
How to Fix AC Making Revving Noise Step-by-Step Guide
Follow these steps to troubleshoot the revving noise:
- Turn off the AC: Before doing anything, switch off your AC unit at the thermostat and turn off the breaker that powers the outdoor unit.
- Inspect the Outdoor Unit: Check the outdoor condenser unit for any visible damage, debris, or loose parts.
- Clean the Area Around the Unit: Remove any leaves, branches, or other obstructions from around the AC unit.
- Check the Fan Blades: Carefully inspect the fan blades for cracks, damage, or debris. Remove any debris.
- Tighten Loose Screws: Look for any loose screws or bolts on the fan, housing, or mounting brackets. Tighten them carefully.
- Listen to the Fan Motor: Manually spin the fan (with the power off!). Does it spin freely, or does it feel rough or noisy? A rough or noisy fan motor may need replacement.
- Inspect the Capacitor: The capacitor is a cylindrical component near the fan motor. If it’s bulging or leaking, it’s faulty and needs professional replacement. (This is best left to a pro).
- Check Refrigerant Lines (Visually): Look for signs of leaks (oily residue) on the refrigerant lines. If you suspect a leak, call a technician immediately.
- Listen for Compressor Noises: If the revving noise seems to be coming from the compressor itself, it may be a sign of a more serious internal problem.
- Check the Contactor: The contactor is located inside the electrical box. Look for signs of burning or damage. (Best left to a pro with proper safety training)
- Reset the AC: After making any adjustments, turn the breaker back on and switch the AC back on at the thermostat. Observe if the noise is still present.
- Run a Test Cycle: Let the AC run for about 15-20 minutes and listen closely for any unusual noises.
- Check the Air Filter: While seemingly unrelated, a clogged air filter can restrict airflow, causing the system to work harder and potentially contribute to noise. Replace your air filter regularly.
Fix the Issue Without Buying Parts
Here are some free things you can try:
- Reset the System: Turn off the AC at the thermostat and breaker for about 30 minutes. Then, turn it back on. This can sometimes resolve minor electrical glitches.
- Clean the Unit Thoroughly: Use a garden hose (with a gentle spray) to clean the outdoor unit. Remove any dirt, dust, or debris that could be affecting its performance.
- Inspect for Obstructions: Ensure that nothing is blocking the airflow around the outdoor unit (bushes, fences, etc.).
- Regular Maintenance: Schedule annual maintenance checkup by a professional to catch minor problems.
When Replacement Might Be Necessary
If the revving noise persists despite your troubleshooting efforts, or if you notice significant performance issues (e.g., weak cooling, high energy bills), it might be time to consider replacing certain parts or, in some cases, the entire unit. Common parts that fail and contribute to revving noises include the fan motor ($100-$300), compressor ($500-$1500), or contactor ($50-$150). Complete AC system replacement can cost between $3,000-$7,000. Get a professional diagnosis before replacing any major component.
Safety Warning
- Always turn off the power to the AC unit before performing any maintenance or repairs.
- Be careful when working around electrical components. If you are not comfortable working with electricity, call a qualified technician.
- Wear gloves and eye protection when cleaning the AC unit.
- Avoid touching any internal components while the AC is running.
- Never use water to clean electrical components.
- If you suspect a refrigerant leak, do not attempt to repair it yourself. Call a qualified technician.
Tools You May Need
- Screwdriver (Phillips and flathead)
- Wrench set
- Gloves
- Eye protection
- Garden hose
- Vacuum cleaner (with brush attachment)
FAQ
Here are some frequently asked questions about AC revving noises:
- Q: My AC is making a revving noise only when it starts. What could it be? A: This could be a sign of a failing compressor or a problem with the starting capacitor.
- Q: The noise goes away after a few minutes. Is it still a problem? A: Yes, even if the noise disappears, it indicates an underlying issue that needs to be addressed to prevent further damage.
- Q: Can I continue to use my AC if it’s making a revving noise? A: It’s not recommended. Running the AC with a known problem can lead to more serious damage and costly repairs.
- Q: How often should I have my AC professionally serviced? A: It is advisable to get a professional checkup at least once a year to keep the unit in good working condition.
- Q: The revving is accompanied by a burning smell, what to do? A: Immediately turn off the unit at the breaker and contact a professional technician, this can be an electrical fire hazard.
Conclusion
Addressing a “revving” noise coming from your AC unit promptly can save you from more expensive headaches in the future. By following these troubleshooting steps, you can often identify the source of the problem and potentially fix it yourself. However, don’t hesitate to call a qualified HVAC technician if you’re uncomfortable working on the AC or if the problem persists. DIY is a great first step, but expert help is there when you need it!
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Air Conditioner Troubleshooting 3 section for step-by-step troubleshooting solutions.
