Whirlpool Wtw5000dw1 Not Draining


Whirlpool Wtw5000dw1 Not Draining

Introduction

Is your Whirlpool WTW5000DW1 washing machine refusing to drain after a wash cycle? This is a common problem that can be frustrating for homeowners. A washing machine full of water renders it unusable, and if left unattended, it can lead to unpleasant odors and even water damage. Let’s troubleshoot why your washer won’t drain and get it working again quickly. Explore more in our Washing Machine Problems 6 collection.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Whirlpool Wtw5000dw1 Not Draining.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of whirlpool wtw5000dw1 not draining

Here are some common reasons why your Whirlpool WTW5000DW1 washer might be having draining issues:

  • Clogged Drain Hose: A kinked or blocked drain hose prevents water from exiting the machine.
  • Clogged Drain Pump Filter: Debris like lint, coins, or buttons can clog the filter, hindering the pump’s ability to remove water.
  • Faulty Drain Pump: The drain pump itself might be malfunctioning and unable to pump the water out.
  • Kinked or Blocked Tub Drain Hose: The hose connecting the tub to the drain pump might be kinked or obstructed.
  • Air Lock in the Drain System: Air trapped within the drain system can prevent the pump from working effectively.
  • Overloading the Washer: Overloading can strain the motor and pump, causing them to malfunction.
  • Lid Switch Malfunction: The lid switch ensures the washer only operates when the lid is closed. A faulty switch can interrupt the drain cycle.
  • Control Board Issues: In rare cases, a problem with the washer’s control board could cause draining problems.

Symptoms Checklist

Check these indicators to confirm the issue:

  • The washer is full of water after the wash cycle.
  • You can hear the washer running, but no water is draining.
  • The washer displays an error code related to draining.
  • The wash cycle completes, but the clothes are soaking wet.
  • The washer is making unusual noises during the drain cycle.

How to Fix whirlpool wtw5000dw1 not draining Step-by-Step Guide

Follow these steps to troubleshoot your Whirlpool WTW5000DW1:

  1. Unplug the Washer: For safety, always disconnect the power cord from the outlet before starting any repairs.
  2. Inspect the Drain Hose: Check the entire length of the drain hose for kinks, bends, or obstructions. Straighten any kinks and remove any visible blockages.
  3. Check the Drain Hose Connection: Ensure the drain hose is properly inserted into the drainpipe. It shouldn’t be pushed in too far, as this can create a siphon effect.
  4. Locate the Drain Pump Filter: On the WTW5000DW1, the drain pump filter is typically located at the lower front of the machine, behind a small access panel. You may need a screwdriver to open the panel.
  5. Drain the Remaining Water: Place a shallow pan or towels beneath the access panel to catch any water that spills out when you remove the filter.
  6. Remove and Clean the Drain Pump Filter: Carefully unscrew and remove the drain pump filter. Clean it thoroughly under running water to remove any lint, debris, or foreign objects.
  7. Inspect the Drain Pump: With the filter removed, shine a flashlight into the drain pump housing. Check for any visible obstructions. You can carefully try to dislodge any debris with a small tool, but be gentle.
  8. Reinstall the Drain Pump Filter: Once the filter and pump housing are clean, carefully reinstall the filter and secure it tightly.
  9. Check the Tub Drain Hose: Locate the hose that connects the tub to the drain pump. Check it for kinks or obstructions. This hose is usually accessible from the back of the machine. You might need to remove the back panel (after unplugging the washer!) for easier access.
  10. Check for Air Lock: Sometimes, air can get trapped in the drain system. Try gently tilting the washer forward or backward to see if this releases any trapped air.
  11. Reset the Washer: Unplug the washer for 1-2 minutes. Then, plug it back in. This can sometimes reset the control board and clear any temporary errors.
  12. Run a Test Cycle: Select a short wash cycle and observe if the washer drains properly.
  13. Check the Lid Switch: If you suspect the lid switch is faulty, you can visually inspect it. However, testing it properly requires a multimeter and some electrical knowledge. If you are not comfortable with electrical testing, skip this step and consider calling a technician.

Fix the Issue Without Buying Parts

Many draining issues can be resolved without replacing parts. Regularly cleaning the drain pump filter (every 1-3 months) and avoiding overloading the washer can prevent future problems. Ensure the drain hose is free of kinks and obstructions. Periodically run an empty washer cycle with a washing machine cleaner to remove build-up. For more related activities, check out our Washing Machine Drum Not Turning During Wash Cycle.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and the washer still won’t drain, you might need to replace the drain pump. A replacement drain pump typically costs between $50 and $150 USD. In rare cases, a faulty control board might be the issue, which is a more expensive repair, potentially costing $200-$400 USD. The drain pump is the most common failing part. Discover more free resources across our collection library.

Safety Warning

  • Always unplug the washing machine before performing any repairs.
  • Be careful when handling water; mop up any spills to prevent slips and falls.
  • If you are not comfortable working with electricity, consult a qualified appliance repair technician.
  • Do not tamper with the lid switch unless you are experienced with electrical repairs.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Shallow pan or towels
  • Flashlight
  • Washing machine cleaner (optional)
  • Multimeter (optional, for testing the lid switch)

FAQ

Here are some frequently asked questions:

  • Q: Why is my washer making a loud noise when it tries to drain?
    A: This could indicate a foreign object stuck in the drain pump or a failing pump motor.
  • Q: How often should I clean the drain pump filter?
    A: Clean the filter every 1-3 months, depending on how frequently you use the washer.
  • Q: What does it mean if my washer is displaying an error code related to draining?
    A: Consult your washer’s user manual to identify the specific meaning of the error code and follow the recommended troubleshooting steps.
  • Q: Can I use a drain cleaner in my washing machine?
    A: No, do not use chemical drain cleaners in your washing machine, as they can damage the machine’s components.
  • Q: My washer drained slowly. What should I do?
    A: Check the drain hose for kinks and clogs. A partially blocked drain hose can slow down the draining process.
  • Q: Is it hard to replace the drain pump on a Whirlpool WTW5000DW1?
    A: The difficulty depends on your experience. There are many online videos showing the replacement procedure. Take your time and unplug the washer first.

Conclusion

Troubleshooting a Whirlpool WTW5000DW1 washing machine that won’t drain can be a straightforward process. By following these steps, you can often identify and resolve the issue yourself, saving you time and money. If you’ve exhausted all troubleshooting options and the problem persists, it’s time to call a qualified appliance repair technician.

Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 6

📚 Related Articles

Scroll to Top