Simpson Washing Machine Not Draining

Introduction

A washing machine that won’t drain can be a real headache! Imagine you’ve just finished a load of laundry, only to find your clothes sitting in a pool of dirty water. This isn’t just inconvenient; it can also lead to mold and mildew growth inside your machine and on your clothes. Addressing this issue quickly is essential to prevent further damage and get your laundry routine back on track.

Common Causes of simpson washing machine not draining

Here are some of the most common reasons why your Simpson washing machine might not be draining properly:. For more related activities, check out our Washer Is Not Draining Completely.

• Clogged Drain Hose: This is often the culprit. Lint, small objects, or debris can get lodged in the hose, blocking water flow.
• Blocked Drain Pump Filter: Many Simpson washing machines have a filter to catch lint and other debris before they reach the drain pump. A full filter restricts drainage.
• Kinked or Damaged Drain Hose: A kink in the hose can prevent water from flowing. A damaged hose may also be leaking, reducing drain pressure.
• Faulty Drain Pump: The drain pump is responsible for actively pumping water out of the machine. If it’s broken, it won’t be able to do its job.
• Clogged Drainpipe: The pipe where your drain hose connects might be clogged.
• Air Lock: Sometimes, air can get trapped in the drain system, creating an air lock that prevents water from flowing.
• Lid Switch Issues: Some washing machines won’t drain if the lid switch isn’t properly engaged. Although less likely, it can happen.
• Control Board Problems: In rare cases, a faulty control board might prevent the drain pump from activating.

Symptoms Checklist

Here are some things to look for to confirm you have a draining issue:

• Water remains in the washing machine drum after a wash cycle.
• The washing machine makes a humming or buzzing sound during the drain cycle, but no water is being pumped out.
• You see an error code related to draining on the washing machine’s display panel (if applicable).
• The drain hose is visibly kinked or damaged.
• The drain pump filter is clogged with lint and debris.

How to Fix simpson washing machine not draining Step-by-Step Guide

1. Unplug the Washing Machine: Safety first! Disconnect the power cord from the outlet.
2. Locate the Drain Hose: It’s usually at the back of the machine.
3. Inspect the Drain Hose: Check for kinks, bends, or any visible damage. Straighten out any kinks.
4. Detach the Drain Hose: Carefully detach the drain hose from both the washing machine and the drainpipe. Have a bucket handy to catch any remaining water.
5. Flush the Drain Hose: Use a garden hose or faucet to flush out any blockages in the drain hose.
6. Check the Drainpipe: Make sure the drainpipe where the drain hose connects isn’t clogged. You can use a plumbing snake or a wet/dry vacuum to clear any obstructions.
7. Locate the Drain Pump Filter: Refer to your owner’s manual to find the drain pump filter. It’s often located at the front, bottom of the machine, behind a small access panel.
8. Remove and Clean the Drain Pump Filter: Carefully remove the filter and clean it thoroughly under running water. Remove any lint, debris, or small objects.
9. Inspect the Drain Pump (If Accessible): If you can access the drain pump after removing the filter, check for any obstructions or damage.
10. Reassemble the Drain Pump Filter: Put the cleaned filter back in place, ensuring it’s securely fastened.
11. Reattach the Drain Hose: Reconnect the drain hose to both the washing machine and the drainpipe. Make sure the connections are tight and secure.
12. Check the Lid Switch: Make sure the lid switch is functioning correctly. Sometimes, it can get stuck or damaged.
13. Run a Test Cycle: Plug the washing machine back in and run a short wash cycle to see if it drains properly.
14. Check for Air Locks: If it still doesn’t drain, try tilting the washing machine slightly forward or backward to release any trapped air.

Fix the Issue Without Buying Parts

Before considering any replacements, try these free fixes:

• Reset the Washing Machine: Unplug the machine for a few minutes, then plug it back in. This can sometimes reset the control board and resolve minor issues.
• Deep Clean the Washing Machine: Run an empty wash cycle with a washing machine cleaner or a mixture of vinegar and baking soda. This can help remove buildup and improve drainage.
• Check for Recalibration Needs: Refer to your owner’s manual to see if your washing machine requires recalibration.
• Regular Maintenance: Clean the drain pump filter regularly (every few months) to prevent clogs.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your Simpson washing machine still isn’t draining, the drain pump itself might be faulty. Replacing the drain pump can cost anywhere from $50 to $150, depending on the model and brand. The control board is another part that can fail, but replacement is more expensive, ranging from $100 to $300. Get professional help at this point.

Safety Warning

• Always unplug the washing machine before performing any maintenance or repairs.
• Be careful when handling water, as wet floors can be slippery.
• If you’re not comfortable working with electrical appliances, consult a qualified technician.
• Avoid overfilling the washing machine, as this can put extra strain on the drain pump.

Tools You May Need

• Bucket
• Pliers
• Screwdrivers (Phillips and flathead)
• Plumbing snake (optional)
• Wet/dry vacuum (optional)
• Gloves

FAQ

Q: Why is my washing machine making a humming noise but not draining?
A: This usually indicates that the drain pump is trying to work but is blocked by something. Check the drain pump filter for clogs.

Q: How often should I clean the drain pump filter?
A: It’s recommended to clean the drain pump filter every 2-3 months, or more frequently if you wash heavily soiled items.

Q: Can I use bleach to clean the drain hose?
A: Yes, you can use a diluted bleach solution to flush out the drain hose, but make sure to rinse it thoroughly afterward.

Q: What do I do if the washing machine is still not draining after cleaning the filter and hose?
A: If you’ve cleaned the filter and hose, and checked for kinks, the drain pump itself might be faulty and need replacement.

Conclusion

Don’t give up on your Simpson washing machine just yet! Many draining issues can be resolved with a bit of troubleshooting and some simple maintenance. By following these steps, you can often fix the problem yourself and save money on costly repairs. However, if you’re uncomfortable with any of these steps, or if the problem persists, don’t hesitate to call a qualified appliance technician.

Youtube Video: