Samsung Automatic Washing Machine Not Taking Water

Introduction

Is your Samsung automatic washing machine refusing to fill with water? This is a common problem that can prevent you from doing your laundry. It’s frustrating because you expect your washing machine to simply work. Ignoring this issue can lead to further problems, like a burnt-out motor or damaged clothes. Let’s troubleshoot this together so you can get your laundry routine back on track!

Common Causes of Samsung Automatic Washing Machine Not Taking Water

Here are some typical reasons why your Samsung washing machine might not be filling:

• Water Supply Issues: The water supply to the machine might be turned off, or the hoses could be kinked.
• Clogged Water Inlet Valves: These valves control the flow of water into the machine, and they can get blocked with sediment.
• Water Inlet Hoses: Hoses may be kinked or blocked.
• Faulty Water Level Sensor: This sensor tells the machine when it has enough water. If it’s faulty, it might not trigger the water to start filling.
• Defective Lid Switch/Door Lock: The machine won’t start filling if it thinks the door isn’t closed properly for safety reasons.
• Low Water Pressure: Insufficient water pressure from your home’s plumbing can prevent the machine from filling correctly.
• Blocked Drain Hose: Sometimes, if the drain hose is blocked, the machine won’t fill because it senses that it can’t drain.
• Control Board Malfunction: In rare cases, a problem with the washing machine’s control board can prevent it from initiating the water filling cycle.

Symptoms Checklist

Check these indicators to help pinpoint the problem:

• The washing machine starts, but no water enters.
• The washing machine makes a humming or buzzing sound but doesn’t fill.
• The error code related to water filling is displayed on the control panel.
• Water trickles in very slowly, then stops.
• The machine appears completely unresponsive when you start a wash cycle.
• Water fills initially then stops.

How to Fix Samsung Automatic Washing Machine Not Taking Water Step-by-Step Guide

1. Check the Water Supply: Make sure both hot and cold water supply valves connected to the washing machine are fully open.
2. Inspect the Water Inlet Hoses: Look for kinks, bends, or twists in the hoses. Straighten them out if necessary.
3. Clean Inlet Hose Filters: Turn off the water supply and disconnect the inlet hoses from the washing machine. There’s usually a small filter screen at the end of the hose where it connects to the machine. Clean these filters under running water with a small brush.
4. Check Water Pressure: Turn on a faucet in your home to check water pressure. If the pressure is low, address the issue with your home’s plumbing.
5. Inspect the Drain Hose: Ensure the drain hose isn’t clogged or kinked. Make sure it is properly inserted into the drainpipe.
6. Check the Lid Switch/Door Lock: Ensure the lid or door is closing properly and engaging the switch. You might need to press firmly to engage the switch.
7. Test the Water Inlet Valve (Advanced): If you are comfortable, with the power off, disconnect the wires from the inlet valve and use a multimeter to check for continuity. No continuity indicates a faulty valve.
8. Reset the Washing Machine: Unplug the washing machine from the power outlet for 1 minute. Then, plug it back in and try running a cycle. This can sometimes reset the control board.
9. Check for Error Codes: Consult your washing machine’s manual to identify the meaning of any error codes displayed on the control panel. This can help narrow down the problem.
10. Run a Test Cycle: Try running a specific test cycle if your washing machine has one. Refer to your user manual for instructions on how to initiate a test cycle.
11. Check the Water Level Sensor Hose: (If accessible) Locate the small hose connected to the water level sensor. Check for kinks, cracks, or obstructions.

Fix the Issue Without Buying Parts

Before considering replacement parts, try these free fixes:

• Reset: Unplugging your washing machine for a minute can often clear minor glitches.
• Cleaning: Regularly clean the inlet hose filters and check for blockages in the drain hose.
• Hose Inspection: Regularly inspect the water inlet and drain hoses for kinks, cracks, or damage.
• Basic Maintenance: Run a cleaning cycle with washing machine cleaner periodically to prevent build-up in the system.

When Replacement Might Be Necessary

If none of the above steps work, the water inlet valve or the water level sensor might be faulty and require replacement. The control board is another part that could fail. Replacement costs can range from $50 to $200+ for parts and installation, depending on the part and your location. A technician can diagnose this accurately. For more related activities, check out our Washer Is Not Draining Completely.

Safety Warning

• Always unplug the washing machine from the power outlet before performing any troubleshooting or repairs.
• Be careful when handling water and electrical components to avoid electric shock.
• Avoid creating wet floors that could cause slipping hazards.
• If you are not comfortable working with electrical components, call a qualified appliance repair technician.

Tools You May Need

• Screwdrivers (Phillips and flathead)
• Pliers
• Adjustable wrench
• Bucket
• Small brush
• Multimeter (for advanced testing)

FAQ

Here are some common questions about this issue:

• Q: Why is my washing machine humming but not filling with water? A: This usually indicates a problem with the water inlet valve. Check if it’s clogged or faulty.
• Q: What does an error code like “E1” or “Water Level Error” mean? A: Consult your washing machine’s manual. These codes usually point to water supply or sensor issues.
• Q: How do I clean the water inlet valve? A: Turn off the water supply, disconnect the hoses, and carefully remove the valve. Rinse it with water to remove any sediment.
• Q: Can low water pressure cause this problem? A: Yes, low water pressure can prevent the washing machine from filling properly.
• Q: How often should I clean the inlet hose filters? A: It’s recommended to clean them every 3-6 months, or more frequently if you have hard water.

Conclusion

Troubleshooting a washing machine that’s not taking water can seem daunting, but with these steps, you can often resolve the issue yourself! Remember to take your time, follow the safety precautions, and don’t hesitate to call a professional if you’re not comfortable. With a bit of patience, you’ll be back to doing laundry in no time! Good luck!

Youtube Video: