Lg Washing Machine Does Not Drain


Lg Washing Machine Does Not Drain

Introduction

A washing machine that won’t drain is a common household headache. Imagine unloading soaking wet clothes after expecting a clean, dry load! A clogged drain hose, a jammed pump, or even a simple software glitch can cause this issue. Addressing a drainage problem promptly prevents water damage, mold growth, and potential electrical hazards. This guide provides simple steps to troubleshoot and potentially resolve the issue yourself. Explore more in our Washing Machine Problems 4 collection.

💡 Technical Key Takeaways:

  • Core Focus: Diagnostic schematic and terminal connection layout for Lg Washing Machine Does Not Drain.
  • Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
  • Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.

Common Causes of LG Washing Machine Does Not Drain

Here are some of the most common reasons why your LG washing machine might not be draining:

  • Clogged Drain Hose: The drain hose carries water from the washer to the drainpipe. It can easily become blocked by lint, small objects (like socks!), or soap buildup.
  • Clogged Drain Pump Filter: The drain pump filter catches debris before it reaches the pump, preventing damage. This filter needs regular cleaning.
  • Obstructed Drain Pump: The pump itself might be jammed by a foreign object like a button, coin, or even hair.
  • Kinked or Blocked Drainpipe: The drainpipe in your wall can also become clogged or restricted, preventing water from flowing freely.
  • Air Lock in Drain Hose: Sometimes, air trapped in the drain hose can prevent proper drainage.
  • Faulty Drain Pump: While less common, the drain pump motor could be defective and unable to pump water.
  • Lid Switch Problem: On some older top-load models, a faulty lid switch might prevent the drain cycle from starting.
  • Control Board Malfunction: In rare cases, the washing machine’s control board could be malfunctioning, preventing the drain cycle from initiating.
  • Excessive Suds: Using too much detergent, or the wrong type (non-HE in an HE machine) can cause excess suds that prevent proper draining.

Symptoms Checklist

Here are some signs that your LG washing machine isn’t draining correctly:

  • Clothes are soaking wet after the wash cycle.
  • Standing water remains in the drum after the cycle is complete.
  • The washing machine makes a humming or buzzing noise but doesn’t drain.
  • You see an error code related to draining on the display panel (like OE, dE, or similar).
  • The washing machine completes the wash cycle, but then stops and displays an error before the spin cycle.

How to Fix LG Washing Machine Does Not Drain Step-by-Step Guide

  1. Safety First! Unplug the washing machine from the power outlet before starting any troubleshooting.
  2. Check the Drain Hose: Locate the drain hose at the back of the washing machine. Ensure it’s not kinked, twisted, or crushed. Straighten any bends.
  3. Inspect the Drain Hose Connection: Disconnect the drain hose from the drainpipe or sink drain. Check for blockages at the connection point.
  4. Flush the Drain Hose: Hold the drain hose over a bucket and flush it with water (use a garden hose if possible) to dislodge any debris.
  5. Check the Drainpipe: Make sure the drainpipe in the wall isn’t clogged. You can use a plumbing snake or a bent coat hanger to clear any obstructions.
  6. Locate the Drain Pump Filter: The drain pump filter is usually located at the bottom front of the washing machine, behind a small access panel. Consult your owner’s manual for the exact location.
  7. Prepare for Water Spillage: Place a shallow pan or towel under the access panel before opening it, as some water will likely spill out.
  8. Clean the Drain Pump Filter: Carefully unscrew the drain pump filter (usually by turning it counterclockwise). Remove any lint, hair, coins, or other debris. Rinse the filter thoroughly under running water.
  9. Inspect the Drain Pump: With the filter removed, shine a flashlight into the drain pump housing. Look for any visible obstructions that might be jamming the pump impeller (the small fan-like blades).
  10. Manually Rotate the Pump Impeller: Try to gently rotate the pump impeller with your finger. If it’s stuck, try to dislodge the obstruction with a small tool (like tweezers or pliers), being careful not to damage the impeller blades.
  11. Reassemble and Test: Reinstall the drain pump filter securely. Reconnect the drain hose to the drainpipe. Plug the washing machine back into the power outlet.
  12. Run a Test Cycle: Select a short spin cycle to test if the washing machine is now draining properly.
  13. Check for Error Codes: If the problem persists and you see an error code, consult your owner’s manual for troubleshooting specific to that code.
  14. Reduce Suds: Use less detergent than you currently use. Make sure the detergent is HE (High Efficiency) if you have an HE machine.

Fix the Issue Without Buying Parts

Before considering replacement parts, try these free fixes:

  • Reset the Washing Machine: Unplug the washing machine for 1-2 minutes, then plug it back in. This can sometimes clear minor software glitches.
  • Recalibrate the Machine (If Applicable): Some LG models have a calibration cycle. Consult your owner’s manual for instructions on how to run this cycle.
  • Regular Cleaning: Run an empty washing machine cycle with a cup of white vinegar or washing machine cleaner every month to prevent buildup and odors.

When Replacement Might Be Necessary

If you’ve tried all the troubleshooting steps and your washing machine still doesn’t drain, the drain pump might be faulty and need replacement. A replacement drain pump typically costs between $50 and $150 (USD), plus labor if you hire a technician. Other, less common parts that might require replacement include the drain hose or the control board. If the control board is the problem, it might be more economical to replace the entire machine, rather than the board.

Safety Warning

  • Always unplug the washing machine from the power outlet before attempting any repairs.
  • Be careful when dealing with water to avoid electrical shock.
  • Wear gloves to protect your hands from sharp edges or debris.
  • If you’re not comfortable performing any of these steps, consult a qualified appliance repair technician.

Tools You May Need

  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Flashlight
  • Shallow pan or towels
  • Bucket
  • Plumbing snake or bent coat hanger (optional)

FAQ

  • Why is my washing machine draining slowly? A slow drain is often caused by a partial clog in the drain hose or drainpipe. Follow the steps above to check and clear any obstructions.
  • What does the “OE” error code mean on my LG washing machine? The “OE” error code typically indicates a draining problem. Try cleaning the drain pump filter and checking the drain hose for blockages.
  • Can I use a drain cleaner in my washing machine? It’s generally not recommended to use chemical drain cleaners in a washing machine, as they can damage the machine’s components.
  • How often should I clean the drain pump filter? It’s recommended to clean the drain pump filter every 1-3 months, depending on how frequently you use your washing machine.

Conclusion

Troubleshooting a washing machine that won’t drain can seem daunting, but by following these steps, you can often identify and fix the problem yourself. Remember to prioritize safety and take your time. If you’re unable to resolve the issue or are uncomfortable performing any of the repairs, don’t hesitate to call a qualified appliance repair technician for assistance. With a little effort, you can get your LG washing machine back to draining properly and avoid costly repairs. Discover more free resources across our collection library.

Youtube Video:


Quick Wiring Specifications & Terminal Guide

Component / Circuit Standard Wire Gauge Recommended Protection
Control & Trigger Signals 18 – 20 AWG 5A – 7.5A Inline Fuse
Standard Auxiliary Load 14 – 16 AWG 15A – 20A Circuit Breaker
Main Power Feed / Supply 10 – 12 AWG 30A – 40A Heavy-Duty Relay

Images References


Images References, Washing Machine Problems 4

📚 Related Articles

Scroll to Top