Introduction
A loud knocking sound during your LG washer’s spin cycle can be alarming! It’s often a sign that something isn’t quite right and ignoring it could lead to more serious damage down the line. This knocking usually occurs when the washer is trying to spin clothes at high speeds. It’s important to address this issue quickly, as continued use with the knocking can cause excessive wear and tear, and potentially shorten the lifespan of your washing machine. Let’s walk through some common causes and simple fixes you can try yourself.
💡 Technical Key Takeaways:
- Core Focus: Diagnostic schematic and terminal connection layout for Lg Washer Knocking When Spinning.
- Target Scope: Field technicians, automotive DIYers, and residential/commercial electricians.
- Safety Rule: Always disconnect the primary power source/battery terminal and verify zero voltage with a multimeter before touching wires.
Common Causes of lg washer knocking when spinning
Here are several reasons why your LG washer might be making a knocking noise during the spin cycle:. For more related activities, check out our Lg Washer Stop Cycle And Drain.
- Unbalanced Load: This is the most common cause. Clothes bunched up on one side create an imbalance.
- Washer Not Level: If the washer isn’t sitting evenly on the floor, it can shake and knock.
- Shipping Bolts Still Attached: These bolts are meant to stabilize the drum during transport and MUST be removed before use.
- Worn Drum Support Springs/Suspension Rods: These springs help keep the drum stable during spinning. Over time, they can wear out.
- Damaged Drum Bearings: Bearings allow the drum to spin smoothly. If they’re worn or damaged, they can cause a knocking sound.
- Loose Objects: Coins, keys, or other small items trapped between the inner and outer drums can cause noise.
- Overloading: Putting too many clothes in the washer at once can strain the machine and lead to knocking.
- Drain Pump Issues: Occasionally, the drain pump can make a knocking sound if it’s partially blocked or malfunctioning.
Symptoms Checklist
Check if any of these symptoms match what you’re experiencing:
- Loud knocking or banging sound primarily during the spin cycle.
- The washing machine shakes violently during the spin cycle.
- The washer “walks” or moves from its original position.
- You notice wet spots or leaks around the washer.
- The washer seems unusually noisy, even when not spinning.
- Clothes are still soaking wet after the spin cycle.
How to Fix lg washer knocking when spinning Step-by-Step Guide
Follow these steps to troubleshoot the knocking noise:
- Check for an Unbalanced Load: Stop the washer, open the door, and redistribute the clothes evenly around the drum. Make sure large, bulky items are balanced with smaller items.
- Level the Washer: Use a level to check if the washer is level. Adjust the leveling feet (usually found at the bottom corners) until the bubble is centered. Turn the feet clockwise to raise the washer and counter-clockwise to lower it.
- Confirm Shipping Bolts are Removed: Locate the rear of the washer and check for any large bolts still attached. Remove them using a wrench. You can usually find plastic caps to cover the holes where the bolts were. Refer to your owners manual for the specific location and removal instructions.
- Check for Obstructions: Unplug the washer. Try manually rotating the drum. Listen for any grinding or scraping sounds that suggest something is trapped.
- Inspect the Drum Support Springs/Suspension Rods: (Requires more disassembly – only attempt if comfortable). These are usually located inside the cabinet of the washer, connecting the drum to the frame. Look for signs of wear, breakage, or detachment. This often requires removing the top or side panel of the washing machine.
- Listen for Sounds from the Drain Pump: Run a short rinse cycle and listen closely to the drain pump (usually located at the bottom of the machine). If it’s making a loud knocking or grinding noise, it might be partially blocked.
- Check the Drain Hose: Make sure the drain hose isn’t kinked or clogged. A blocked drain hose can cause the washer to vibrate excessively.
- Reduce Load Size: Try washing smaller loads to avoid overloading the washer.
- Run a Calibration Cycle: Some LG washers have a calibration cycle that helps the machine balance itself. Consult your owner’s manual for instructions on how to run this cycle.
- Check for Loose Screws or Panels: Inspect the exterior of the washer for any loose screws or panels that might be vibrating during the spin cycle. Tighten them as needed.
- Clean the Washer: Run a cleaning cycle with a washing machine cleaner to remove any buildup that could be contributing to the problem.
- Ensure Adequate Space: Make sure the washing machine has enough space around it. Avoid pressing up against walls or other appliances to prevent vibrations.
Fix the Issue Without Buying Parts
Before considering replacement parts, try these free methods:
- Reset the Washer: Unplug the washer for a few minutes, then plug it back in. This can sometimes reset the control board and resolve minor issues.
- Recalibrate: Some models have a recalibration feature, check your manual.
- Cleaning Cycle: Regular cleaning prevents buildup and maintains performance. Use washing machine cleaner.
- Visual Inspection: Look closely at the drum, hoses, and connections for any obvious signs of damage or wear.
- Proper Loading: Always distribute clothes evenly in the drum.
When Replacement Might Be Necessary
If the knocking persists after trying all the troubleshooting steps, the following parts might need replacing. Remember to always consult with a qualified appliance repair technician before replacing any parts. Estimated costs (USD) are approximate and can vary:
- Drum Support Springs/Suspension Rods: ($50 – $150) These are a common cause of knocking in older machines.
- Drum Bearings: ($80 – $200 + labor) Replacing drum bearings can be a complex repair best left to a professional.
- Drain Pump: ($40 – $100) If the drain pump is making a loud knocking noise, it may need to be replaced.
Safety Warning
- Always unplug the washer before attempting any repairs.
- Avoid working on the washer if the floor is wet.
- If you’re not comfortable with electrical or mechanical repairs, consult a qualified appliance repair technician.
- Be careful when lifting or moving the washer, as it can be heavy.
Tools You May Need
- Level
- Wrench set
- Screwdriver set (Phillips and flathead)
- Pliers
- Gloves
- Flashlight
FAQ
Here are some frequently asked questions:
- Q: Why is my new washer knocking? A: Shipping bolts may still be attached. Remove them according to the manual.
- Q: How do I know if my washer is level? A: Use a level to check the top of the washer. Adjust the leveling feet until the bubble is centered.
- Q: Can overloading cause knocking? A: Yes, overloading can strain the machine and lead to imbalance and knocking.
- Q: How often should I clean my washing machine? A: It’s recommended to clean your washing machine every month or two, depending on usage.
Conclusion
Troubleshooting a knocking LG washer can seem daunting, but many causes are simple to address. By following these steps, you can often identify and fix the problem yourself, saving time and money. If the knocking persists or you’re uncomfortable with any of the repairs, don’t hesitate to call a qualified appliance repair technician for assistance.
Youtube Video:
Quick Wiring Specifications & Terminal Guide
| Component / Circuit | Standard Wire Gauge | Recommended Protection |
|---|---|---|
| Control & Trigger Signals | 18 – 20 AWG | 5A – 7.5A Inline Fuse |
| Standard Auxiliary Load | 14 – 16 AWG | 15A – 20A Circuit Breaker |
| Main Power Feed / Supply | 10 – 12 AWG | 30A – 40A Heavy-Duty Relay |
Images References
Looking for more diagnostic guides? Explore our complete Washing Machine Problems 4 section for step-by-step troubleshooting solutions.
